HomeRF

[1] The group was disbanded in January 2003, after other wireless networks became accessible to home users and Microsoft began including support for them in its Windows operating systems.

Initially called Shared Wireless Access Protocol (SWAP) and later just HomeRF, this open specification allowed PCs, peripherals, cordless phones and other consumer devices to share and communicate voice and data in and around the home without the complication and expense of running new wires.

HomeRF combined several wireless technologies in the 2.4 GHz ISM band, including IEEE 802.11 FH (the frequency-hopping version of wireless data networking) and DECT (the most prevalent digital cordless telephony standard in the world) to meet the unique home networking requirements for security, quality of service (QoS) and interference immunity—issues that still plagued Wi-Fi (802.11b and g).

[citation needed] HomeRF used frequency hopping spread spectrum (FHSS) in the 2.4 GHz frequency band and in theory could achieve a maximum of 10 Mbit/s throughput; its nodes could travel within a 50-meter range of a wireless access point while remaining connected to the personal area network (PAN).

As a result, the original promoter companies gradually started pulling out of the group rather than supporting multiple standards.

[7] The fact that WECA members lobbied the FCC for two years, which was effective in delaying the approval of wideband frequency-hopping, helped 802.11b catch up and gain an insurmountable lead in the market, which was then extended with 802.11g.