Backward Euler method
In numerical analysis and scientific computing, the backward Euler method (or implicit Euler method) is one of the most basic numerical methods for the solution of ordinary differential equations.
It is similar to the (standard) Euler method, but differs in that it is an implicit method.
The backward Euler method has error of order one in time.
Consider the ordinary differential equation with initial value
and the initial data
depends on the real variable
A numerical method produces a sequence
is called the step size.
The backward Euler method computes the approximations using This differs from the (forward) Euler method in that the forward method uses
The backward Euler method is an implicit method: the new approximation
appears on both sides of the equation, and thus the method needs to solve an algebraic equation for the unknown
For non-stiff problems, this can be done with fixed-point iteration: If this sequence converges (within a given tolerance), then the method takes its limit as the new approximation
[2] Alternatively, one can use (some modification of) the Newton–Raphson method to solve the algebraic equation.
Integrating the differential equation
yields Now approximate the integral on the right by the right-hand rectangle method (with one rectangle): Finally, use that
is supposed to approximate
and the formula for the backward Euler method follows.
[3] The same reasoning leads to the (standard) Euler method if the left-hand rectangle rule is used instead of the right-hand one.
The local truncation error (defined as the error made in one step) of the backward Euler Method is
The error at a specific time
It means that this method has order one.
LTE (local truncation error) is said to be of kth order.
The region of absolute stability for the backward Euler method is the complement in the complex plane of the disk with radius 1 centered at 1, depicted in the figure.
[4] This includes the whole left half of the complex plane, making it suitable for the solution of stiff equations.
[5] In fact, the backward Euler method is even L-stable.
The region for a discrete stable system by Backward Euler Method is a circle with radius 0.5 which is located at (0.5, 0) in the z-plane.
[6] The backward Euler method is a variant of the (forward) Euler method.
Other variants are the semi-implicit Euler method and the exponential Euler method.
The backward Euler method can be seen as a Runge–Kutta method with one stage, described by the Butcher tableau: The method can also be seen as a linear multistep method with one step.
It is the first method of the family of Adams–Moulton methods, and also of the family of backward differentiation formulas.
