The deformation index is a parameter that specifies the mode of control under which time-varying deformation or loading processes occur in a solid.
It is useful for evaluating the interaction of elastic stiffness with viscoelastic[1] or fatigue behavior.
In a strain controlled application, the lower stiffness rubber would operate at smaller stress and therefore produce less viscous heating.
But in a stress controlled application, the higher stiffness rubber would operate at small strains thereby producing less viscous heating.
In an energy controlled application, the two compounds might give the same amount of viscous heating.
The right selection for minimizing viscous heating therefore depends on the mode of control.
is the parameter whose value is controlled (ie held constant).
is Young's modulus of linear elasticity.
yield particular modes of control and determine the units of
The parameter was originally proposed by Shingo Futamura, who won the Melvin Mooney Distinguished Technology Award in recognition of this development.
Futamura was concerned with predicting how changes in viscoelastic dissipation were affected by changes to compound stiffness.
Later, he extended applicability of the approach to simplify finite element calculations of the coupling of thermal and mechanical behavior in a tire.
[3] William Mars adapted Futamura's concept for application in fatigue analysis.
Given that the deformation index may be written in a similar algebraic form, it may be said that the deformation index is in a certain sense analogous to the polytropic index for a polytropic process.