Nikon F90

[1] At the time of its release it was noted for its fast autofocus speed compared to previous Nikon models, which had lagged behind competitor Canon's.

The Nikon F90's autofocus system was driven by a small 'peanut' motor in the camera body that drove the lens via a mechanical link, unlike Canon's autofocus system, which used motors built into each lens.

It was also the first Nikon SLR to interoperate with the first generation of Nikkor lenses featuring internal focusing motor.

This procedure will remove the rubberised top coating without affecting the surface finish of the underlying plastic or the clear film viewing window.

Differences included faster and more accurate autofocus and shutter speed adjustments in thirds of a stop versus the full-stop increments of the F90.

The MB-10 added a vertical-grip shutter release and provides a larger grip area which is especially useful when a large lens is attached to the body.

Plain N90 and F90 models will receive and mount the MB10, but the vertical shutter controls will not work as they lack the necessary internal electrical contacts in the battery chamber.

The MF-26 data back, allows the user to change the camera's configuration on demand and without using a PC, and creates a powerful set for film photography.

[4] Newer G lenses without aperture rings only fully function under shutter priority and program modes.

[4] DX lenses are not recommended as they do not cover the full 35mm frame and will lead to vignetting; however they still will function if use is desired.

The Nikon N90s body with MB10 battery grip
Nikon AC-2E Data Link System (1993)
The Kodak DCS 420 was based on a Nikon N90 body with a Kodak-designed digital camera back attached.