Novena is an open-source computing hardware project designed by Andrew "bunnie" Huang and Sean "Xobs" Cross.

Ltd. and funded by a crowdfunding campaign which began on April 15, 2014.

The first offering was a 1.2 GHz Freescale Semiconductor i.MX6 quad-core ARM architecture computer closely coupled with a Xilinx FPGA.

The extra funding allowed the project to achieve the following four "stretch goals", with the three hardware stretch goals being shipped in the form of add-on boards that use the Novena's special high-speed I/O expansion header, as seen in the upper-left of the Novena board: The Novena shipped with a screwdriver, as users are required to install the battery themselves, screw on the LCD bezel of their choice, and obtain speakers as a kit instead of using speaker boxes.

Owners of a 3D printer can make and fine tune their own speaker box.