Self-pulsation takes place at the beginning of laser action.
As the pump is switched on, the gain in the active medium rises and exceeds the steady-state value.
The number of photons in the cavity increases, depleting the gain below the steady-state value, and so on.
The laser pulsates; the output power at the peaks can be orders of magnitude larger than that between pulses.
After several strong peaks, the amplitude of pulsation reduces, and the system behaves as a linear oscillator with damping.
is area of the pumped region (good mode matching is assumed);
is power of pump absorbed in the gain medium (which is assumed to be constant).
Such equations appear in the similar form (with various notations for variables) in textbooks on laser physics, for example, the monography by A.Siegman.
In this case, the decay of the self-pulsation in a real lasers is determined by other physical processes, not taken into account with the initial equations above.
The only numerical solutions were believed to exist for the strong pulsation, spiking.
The intent of realization of the oscillator Toda at the optical bench is shown in Fig.4.
The colored curves are oscillograms of two shouts of the quasi-continuous diode-pumped microchip solid-state laser on Yb:YAG ceramics, described by.
[3] The thick black curve represents the approximation within the simple model with oscillator Toda.
Change of variables lead to the equation for Toda oscillator.
[4][3] At weak decay of the self-pulsation (even in the case of strong spiking), the solution of corresponding equation can be approximated through elementary function.
The error of such approximation of the solution of the initial equations is small compared to the precision of the model.
The pulsation of real the output of a real lasers in the transient regime usually show significant deviation from the simple model above, although the model gives good qualitative description of the phenomenon of self-pulsation.