Sound blimp

It was invented by Irving Jacobson in the mid-1960s[dubious – discuss], and revolutionized film still photography by allowing stills to be taken during shooting, rather than after the fact.

[1] In construction, it is a rigid box, filled with foam, with holes for the lens and viewfinder, and switches so one can focus and release the shutter from the outside of the case.

One can make one using an existing camera case and a cable release; Pelican cases by Pelican Products are frequently mentioned.

A soft enclosure, the Camera Muzzle, is made by Sam Cranston; this is less effective than a hard enclosure, but significantly cheaper and easier to use; it is designed to be sufficient for most non-intrusive use, but not for demanding use such as film sets.

A similar solution was Minolta's Insulation Case (6081-660, 43325-74196-8), primarily designed for film SLRs used at low temperatures, but also advertised to reduce camera sound.