Tilt test (geotechnical engineering)

The sample is slowly tilted until the top block moves.

The angle with the horizontal at onset of movement is called the tilt-angle.

In the field, the angle can be determined most easily with an inclinometer as present in most geological or structural compasses.

The tilt-angle equals the material friction of the discontinuity wall plus the roughness i-angle (tilt-angle = φwall material + i) if no real cohesion is present (i.e. no cementing or gluing material between the two blocks), no infill material is present, the asperities do not break, and the walls of the discontinuity are completely fitting at the start of the test, while if the walls of the discontinuity are completely non-fitting, the tilt-angle equals the friction of the material of the discontinuity walls (tilt-angle = φwall material).

If cementation or gluing material is present or asperities break, the tilt-angle represents a combination of the (apparent or real) cohesion and the friction along the discontinuity.