That design was produced by Auroraglas and then by Watkins Yachts, in Clearwater, Florida, United States after the companies were merged.
It has a masthead sloop rig, a raked stem, a raised transom, a skeg-mounted rudder controlled by a wheel and a fixed fin keel.
[1][3][4] The design's hull is molded in a single piece using polyester resin and fiberglass woven roving, as well as multidirectional chopped strand fibers (MSCF).
The deck and the cockpit and also moulded in pone piece, also using polyester resin and fiberglass woven roving with MCSF.
[1][3][4] The boat was factory delivered with many equipment items as standard, including a pressurized water system, a shower, ten opening ports and two hatches, a folding dining table in the main cabin and provisions for shore power.
The galley is located aft, in the passageway to the owner's state room and is fitted with a double sink, a 12 volt refrigerator and a three-burner propane-fired stove with an oven.