Grounding kit

It is used for grounding /earthing coaxial cables of copper or aluminium on antenna installations for telecommunication (mobile communications).

The clamp will be screwed on a coaxial cable and in case of lightning strokes in the antenna installation, the voltage will be diverted over a ripple in the clamp with the combined cable and will be earthed / grounded by this way.

The tin-plated ripple with a special alloying enables the bridging over big tolerances between kit and coaxial cable which is important for a best possible voltage transmission.

The ripple to the skinned coaxial cable has a low contact resistance between 0.10 and 0.15 mΩ.

It also enables a better length compensation as well as even and low contact pressures, which avoids damages on the coaxial cable.

Grounding kits for different diameters
Part of a tin-plated ripple