Quasi-phase-matching is a technique in nonlinear optics which allows a positive net flow of energy from the pump frequency to the signal and idler frequencies by creating a periodic structure in the nonlinear medium.
Consequently, in principle any three-wave mixing process that satisfies energy conservation can be phase-matched.
For example, all the optical frequencies involved can be collinear, can have the same polarization, and travel through the medium in arbitrary directions.
Energy will always flow from pump to signal as long as the phase between the two optical waves is less than 180 degrees.
Beyond 180 degrees, energy flows back from the signal to the pump frequencies.
The coherence length is the length of the medium in which the phase of pump and the sum of idler and signal frequencies are 180 degrees from each other.
At each coherence length the crystal axes are flipped which allows the energy to continue to positively flow from the pump to the signal and idler frequencies.
The most commonly used technique for creating quasi-phase-matched crystals has been periodic poling.
[3] A popular material choice for this is lithium niobate.
[4][5][6] More recently, continuous phase control over the local nonlinearity was achieved using nonlinear metasurfaces with homogeneous linear optical properties but spatially varying effective nonlinear polarizability.
[7][8][9] Optical fields are strongly confined within or surround the nanostructures, nonlinear interactions can therefore be realized with an ultra-small area down to 10 nm to 100 nm and can be scattered in all directions to produce more frequencies.
[10][11] Thus, relaxed phase matching can be achieved at the nanoscale dimension.
[12] In nonlinear optics, the generation of new frequencies is the result of the nonlinear polarization response of the crystal due to a typically monochromatic high-intensity pump frequency.
When the crystal axis is flipped, the polarization wave is shifted by 180°, thus ensuring that there is a positive energy flow to the signal and idler beam.
In the case of sum-frequency generation, where waves at frequencies
In this frequency domain vector representation, the sign of the
coefficient is flipped when the nonlinear (anisotropic) crystal axis is flipped, [citation needed] Let us compute the nonlinearly-generated signal amplitude in the case of second harmonic generation, where a strong pump at
The signal wavelength can be expressed as a sum over the number of domains that exist in the crystal.
In general the spatial rate of change of the signal amplitude is
In the case of a periodically poled crystal the crystal axis is flipped by 180 degrees in every other domain, which changes the sign of
the right part of the above equation is undefined so the limit needs to be taken when
From this equation it is apparent, however, that as the quasi-phase match order
For example, for 3rd order quasi-phase matching only a third of the crystal is effectively used for the generation of signal frequency, as a consequence the amplitude of the signal wavelength only third of the amount of amplitude for same length crystal for 1st order quasi-phase match.
The domain width is calculated through the use of Sellmeier equation and using wavevector relations.
In the case of DFG this relationship holds true
for the different frequencies, the domain width can be calculated from the relationship
This method enables the generation of high-purity hyperentangled two-photon state.
In orthogonal quasi-phase matching (OQPM),[13] a thin-layered crystal structure is combined with periodic poling along orthogonal directions.
By combining periodic down-conversion of orthogonally polarized photons along with periodic poling that corrects the phase mismatch, the structure self corrects for longitudinal walkoff (delay) as it happens and before it accumulates.
The superimposed spontaneous parametric downconversion (SPDC) radiation of the superlattice creates high-purity two-photon entangled state.