Red heat

The practice of using colours to determine the temperature of a piece of (usually) ferrous metal comes from blacksmithing.

Long before thermometers were widely available, it was necessary to know what state the metal was in for heat treating it and the only way to do this was to heat it up to a colour which was known to be best for the work.

According to Chapman's Workshop Technology, the colours which can be observed in steel are:[1] In 1905, Stirling Consolidated Boiler Company published a slightly different set of values:[2]

Thermal radiation in visible light can be seen on this hot metalwork.
The peak wavelength and total radiated amount vary with temperature according to Wien's displacement law . Although this shows relatively high temperatures, the same relationships hold true for any temperature down to absolute zero. Visible light is between 380 and 750 nm.