Coiling (pottery)

Using the coiling technique, it is possible to build thicker or taller walled vessels, which may not have been possible using earlier methods.

The technique permits control of the walls as they are built up and allows building on top of the walls to make the vessel look bigger and bulge outward or narrow inward with less danger of collapsing.

To do this, the potter takes a clay body then rolls it until it forms a coil, or long pliable cylinder.

As this is done while the clay is still fresh and soft, individual coils can be joined seamlessly with simple pressure, rather than by scoring and/or applying slip to the surface.

Optionally, coils may only be joined internally or externally, leaving them visible on the other side as an aesthetic choice.