As a low pressure area, it moved slowly across Puerto Rico and Hispaniola, dumping torrential rains across those islands.
It made landfall in Nova Scotia as a Category 1 hurricane late on September 28, then became extratropical shortly afterward.
The precursor to Kyle produced torrential rainfall over Puerto Rico, resulting in six fatalities and $48 million in damages.
Hurricane Kyle began as a weak area of low pressure associated with a tropical wave that moved off the west coast of Africa on September 12.
[2] An upper-level trough situated over the eastern Caribbean Sea interacted with the wave, resulting in an increase in shower and thunderstorm activity.
[1] The National Hurricane Center (NHC), at this time, were not anticipating significant development of the low as strong wind shear inhibited deep convection from forming.
[3] Around 1400 UTC on September 21, a Tropical Cyclone Formation Alert (TCFA) was issued for the system as convection developed around the center of circulation.
[1] Shortly after, the NHC issued their first advisory on the system as it intensified into a tropical storm, assigning it the name Kyle.
[7] Several hours later, the storm made a sudden northwest jump due to a passing shortwave trough.
Continued organization led to the storm attaining hurricane intensity at 1200 UTC on September 27 while located about 345 mi (555 km) west of Bermuda.
Several hours later, the barometric pressure of the storm decreased to 984 mbar (hPa; 29.06 inHg), the lowest during its existence.
Buoys nearby the storm recorded seas in excess of 36 ft (11 m) and hurricane-force winds as it neared landfall.
[13] It was estimated that Kyle made landfall near Yarmouth, Nova Scotia around 0000 UTC on September 29 with winds of 75 mph (120 km/h).
[1] On September 22, about 3 days before the system had formed into a tropical storm, its significant rainfall in the eastern Caribbean prompted flash flood warnings in Puerto Rico and the British Virgin Islands.
Eastern Maine's power company, Bangor Hydro-Electric, prepared for potential outages and planned to have additional crews on duty.
[28] Heavy rains on September 23, produced by the tropical wave which would eventually become Kyle, caused renewed flooding in the already flood-stricken areas of the Dominican Republic and Haiti.
[15] Between September 25 and 26, the outer bands of Kyle brought sustained winds up to 45 mph (75 km/h) and heavy rains that amounted to 1.53 in (39 mm) during the two-day span in Bermuda.
[32] Large swells produced by Kyle, enhanced by a strong onshore flow, caused significant beach erosion along the New Jersey coastline.
[34] Rainfall up to 5 in (127 mm) in Massachusetts caused a river in Somerset to overflow its banks, flooding nearby areas with 2 feet (0.6 m) of water.
[36] As the storm made landfall in Nova Scotia, the outer bands produced heavy rains and strong winds over eastern Maine.
[32][34][35][36] Upon making landfall, Kyle produced a 2.6 ft (0.79 m) storm surge in combination with high tide and a new moon.
[23] In southwestern Nova Scotia, high winds downed numerous trees and power lines.
Gusting winds resulted in the Confederation Bridge, linking New Brunswick and Prince Edward Island, being closed to high-sided vehicles for 7½ hours.
People who lost their jobs due to the flooding were eligible for unemployment grants for 26 weeks starting the day of the disaster declaration.